Description

【OBD2 + GPS Dual System】: MAIMEIMI gps speedometer is equipped with OBD2 and GPS two systems, when you start the initial heads up display, will let you choose the language and system, you can choose according to your own needs. It should be noted that the OBD2 mode of MAIMEIMI speedometer requires a vehicle that supports the OBD protocol to be used, and the gps speedometer in OBD2 mode does not support OBDI and JOBD. GPS mode works with all vehicles.
【Multi-Functional Heads Up Display】: The OBD2 system's MAIMEIMI heads up display can monitor a variety of vehicle data, Including speed, water temperature, oil temperature, voltage, fuel consumption, RPM, clock, one-way driving distance, one-way driving time, travel direction and so on. The heads up display in GPS mode can display altitude, gps speed, driving distance, driving distance time, date, etc. Different data combinations of heads up display can be switched to 10 modes.
【Multiple Cool UI Interfaces】: The Digital speedometer for car can switch between multiple data displays and different color UI interfaces,You can adjust the display data and interface colors of the Digital speedometer according to the actual situation. The cool UI interface and colors match the design body of the Digital speedometer itself, and it is also a good technological decoration to install in the car.
【Easy installation】: The MAIMEIMI car speedometer is compatible with vehicles with OBD ports since 2008 (OBD2 and EOBD support), while the GPS mode is compatible with all vehicles, plug and play, very convenient and simple. The Car speedometer package includes a stand base that allows you to place the hud Car speedometer flat in front of or attached to the windshield as needed. The stand base allows the heads up display to rotate in all directions and can be adjusted for Angle and orientation.
【Note】: The car hud speedometer in GPS mode requires 5 satellite icons to be displayed on the screen in order to work properly. When the signal is not good in the underground parking lot, tunnel, and other places, the hud speedometer data for car will have a certain error, and the hud will return to normal after the vehicle is driven to an empty place. If you do not use the vehicle for a long time, please unplug the OBD cable to prevent the hud speedometer from wasting power for a long time.
【Note】This OBD heads up display is only applicable to cars that support OBDII and EOBD protocols (cars produced after 2008 began to use OBDII and EOBD), it does not support OBDI and JOBD. The following brands are not compatible with the OBD2 system: Dodge/JEEP/ Sail/Chrysler/French models/Italian models/ Suzuki/Mazda 6/Infiniti (QX50, Q50, Q501)/Toyota Avanza in 2013/Lexus (IS250, EX250, ES300H)/Honda (Jazz, CRV)/Kia/hybrid and diesel vehicles/pickups/RVs/vehicles with modified automotive computers (Note: If you want to use OBD mode, but do not know if your car is compatible with OBD, please check with us)

MAIMEIMI HUD SPEEDOMETER - SAFER DRIVING

car heads up display

The MAIMEIMI heads up display for cars is engineered to enable you to concentrate more on the road and perceive the driving data more intuitively, avoiding the distraction of looking downward at the instrument, thereby enhancing your driving experience and rendering the journey safer.

MAIMEIMI HEAD UP DISPLAY SPEEDOMETER - OBD2 SYSTEM

digital speedometer

The MAIMEIMI heads up display with OBD2 system has powerful data monitoring capabilities and can monitor up to 20 types of car data.

Note：the OBD2 mode of this product is only applicable to OBDII and EOBD, and the year of vehicle production (after 2008, OBDII and EOBD will be used).

MAIMEIMI HEADS UP DISPLAY - MULTIPLE MODE

car speedometer

The MAIMEIMI heads up display for cars has a variety of data display modes can be switched at will, different modes will display different data combinations, while the interface color and atmosphere light will also change, you can change according to your own preferences and needs.

Operating Voltage	11-18V (12Vdc/200mA) Please use a USB cable for cars higher than 24 volts
System	OBD/GPS（After connecting the power supply, you can choose which system to use）
Please Note 1	If you do not use the car for a long time, please remember to unplug the power plug to save power.
Adjustable Speed:	If you find that the speed does not match the speed of your car's meter, you can adjust it as following steps
Step 1.	Confirm that your speed unit is MPH, if not, please enter the speed unit setting module to switch(refer to the user manual for the method of entering the setting menu), ensure that the speed unit is MPH, then you could follow step 2.
Step 2.	Speed fine-tuning: Enter speed unit setting module, you will see the initial value is 107, assuming that your meter value is 100 mph, and the HUD is 105 mph, that is, the HUD is 5mph faster than the meter value, then you need to subtract 5mph from the initial value 107, which means that you need to adjust the initial value to 102. So the secret of the adjustment is to add/subtract the difference between the meter and the HUD using the initial value 107.
Step 3.	If the speed of the instrument and HUD cannot be matched by the above two steps, we suggest that you enter factory reset module, restore the factory Settings, and then measure the speed again or repeat the above two steps for adjustment.
Step 4.	If you encounter any problems in the adjustment process or think that the HUD does not meet your expectations, please do not worry, we will provide you with more careful after-sales service.

MAIMEIMI DIGITAL SPEEDOMETER FOR CAR - DETAIL PRESENTATION

About Dimensions And Buttons

Please make sure that the size meets your needs before purchasing.

All the data can be set with three buttons, which makes it easier to control.

gps speedometer mph

Flexible Installation

The package includes a double-sided sticker and a suction cup base. You can lay the HUD flat or attach it to the windshield as needed.

head up display

Easy to Install

Insert the OBD cable into the cigarette lighter port, one end into the HUD, and then plug the data cable into the A-pillar seal.

head up display for car

The Package Includes:

HUD speedometer; Data cable; Adsorption base; Double-sided adhesive sticker; Specification;

Crowbar

MAIMEIMI SPEEDOMETER - APPLICABLE TO VEHICLES THAT SUPPORT OBD2/EOBD AFTER 2008

heads up display

Attention Please: This product only applies to OBDII and EOBD in OBD2 mode, Year of production (after 2008, OBDII and EOBD were used), OBD2 mode does not support OBD I and JOBD, GPS systems are available for all vehicles.

AFTER SALE SERVICE

We offer a 100% satisfaction guarantee, a 30-day money-back guarantee.
We have 24/7/365 email support.
We strive to make our customers 100% satisfied with the product you have purchased. Please don't hesitate to email us with any questions or problems and we will help you right away.

SHIPPING POLICIES：

Tip: Buying 2 products or more at the same time will save you quite a lot on shipping fees.

THIS PRODUCT IS A LIMITED PRODUCTION AND IS NOT AVAILABLE IN STORES. WILL SELL OUT FAST!

🌎 Worldwide Shipping ✈

🔥 Fast refund>> Partial or full refund depend on the situation;

🚚 Insured Worldwide Shipping: Each order includes real-time tracking details and insurance coverage in the unlikely event that a package gets lost or stolen in transit.

✉️ 24/7 Customer Support: We have a team of live reps ready to help and answer any questions you have within a 24-hour time frame, 7 days a week.

🔒 Safe & Secure Checkouts: We use state-of-the-art SSL Secure encryption to keep your personal and financial information 100% protected.

We do our best to process & ship all orders as soon as possible. We're proud to offer worldwide shipping